Wall Stands

Wall Stands are available in units of 3m x 3m (9 square metres). All Wall Stand units include standard colour carpet, a back wall and two side walls 2.5m high with aluminium framing, and a front fascia including name and stand number. The wall panels are white melamine finished. The front fascia is blue melamine finished.

Wall Stands will be allocated on the basis of a minimum of one per Exhibitor, but an Exhibitor may apply for more than one Wall Stand.

On multiple units, the inner partitions will be omitted. On end stands, the outer partition will be fitted only if requested by the Exhibitor.

Wall Stands will be equipped with two 150 watt, 240 volt swivel spotlights and one 10 amp, 240 volt power point. Additional electrical power and lighting supplies are available at a cost to the Exhibitor.

No alteration, addition or customisation may be undertaken to Wall Stands without the prior express approval of the Organiser.

For further information, please email expo@amda.com.au

Mini Wall Stands

Mini Wall Stands are available in units of 1.5m x 3m (4.5 square metres). All Mini Wall Stands include standard colour carpet, a back wall and two side walls 2.5, high with aluminium framing, and a front fascia including name and stand number. The wall panels are white melamine finished.

Mini Wall Stands will be allocated on the basis of only one per Exhibitor.

On end stands the outer partition will be fitted only if requested by the Exhibitor.

Mini Wall Stands will be equipped with one 150 watt, 240 volt swivel spotlight and one 10 amp, 240 volt power point. Additional electrical power and lighting supplies are available at a cost to the Exhibitor.

No alteration, addition or customisation may be undertaken to Mini Display Booths.

For further information, please email expo@amda.com.au

Custom Stands (Raw Space)

A Custom Stand is raw space that must comprise a minimum 36 square metres.

Carpet is not included with Customs Stands.

Custom Stand Exhibitors must advise the Organiser as soon as possible of their Stand Contractor/Builder. Custom Stand Design plans must then be submitted to the Organiser (who seeks approval also by the Sydney Convention and Exhibition Centre) by an appropriate deadline (to be confirmed). Approval will be given only to plans that meet the strict criteria put in place by the Organiser and The Centre. For further information on this issue, please email dfraser@amda.com.au

The Organiser will provide the equivalent of 30 amps single-phase power to each 6m x 6m Custom Stand (240 volt 50 Hz in two 15 amp feeds). Additional electrical power may be available on request to the Organiser and at the expense of the Exhibitor.

Exhibitors using their own Electrical Contractors should calculate their total power requirements and include this estimate with their Custom Stand Design plans for approval by the nominated deadline (to be confirmed).

Upper level areas may be permitted on Custom Stands over 70sqm. If approved by the Organiser, an upper storey will incur additional charges for the floor area of the upper level.

For further information, please email expo@amda.com.au

Vessels

Exhibitors wishing to display vessels should contact the Organiser for further information. Please email expo@amda.com.au

Important Notes for All Exhibitors

Potential exhibitors should download the exhibitor regulations to ensure they are aware of all obligations for participants at Pacific 2010. Exhibition Regulations will be available mid 2009.

If you are interested in exhibiting at Pacific 2010 and would like to correspond with our Sales Team, please forward any enquiries regarding the show to expo@amda.com.au

You are also welcome to register your interest in any aspect of this show. Please click here to do so.